
M-Flocs: Advanced Moving Bed Bioreactor System (AMBBR)
Albion system brand
Albion system brand offers next-gen biological treatment using proprietary high-surface-area carriers to maximize bacterial growth in minimal tank volumes.
Visit official websiteBrand story
What M-Flocs Is
M-Flocs is Albion Ecotech’s advanced moving bed bioreactor (AMBBR) system. It adds carrier media to the aeration basin so that bacteria can grow on the carrier surface as well as in suspension. The carriers have a high surface area, which means more biomass can be held in a smaller tank volume.
How the Hybrid Process Works
M-Flocs runs as an IFAS (Integrated Fixed Film Activated Sludge) process. Activated sludge stays suspended in the mixed liquor and is returned through RAS, as in a conventional activated sludge plant. A second population of bacteria grows as a biofilm on the carriers. The two growth modes work in the same reactor, so the plant gets more biomass without needing a proportional increase in suspended solids.
The attached biofilm can also hold slower-growing organisms, which supports nitrification where basin volume, temperature or loading would otherwise limit it.
Carrier Design
The performance of the system depends on the carrier. The M-Flocs carriers have:
- High specific gravity for easier mixing and fluidization at a lower energy demand
- A hydrophilic surface for faster colonization and better wetting
- Fine pores and high porosity to speed up colonization and protect biomass during shock loads
- A rough, adsorbing surface to support the growth of specific biomass
- A lower filling degree to improve mixing and mass transfer
Where M-Flocs Is Used
- Textile and pharmaceutical wastewater
- Automobile industry effluent
- Sewage water treatment
- Heavy metal removal
- Ammonia and nitrate removal
- Upgrading existing plants with minimal civil and mechanical modification
Upgrading an Existing Plant
Many plants need more biological capacity but have no space for another basin. With IFAS, carriers can be added to an existing activated sludge basin, either across the whole tank or in selected zones. The upgrade is assessed around the existing civil structures, the aeration capacity and the secondary clarifier. Where nitrogen has to be removed, the layout of aerobic and anoxic zones, internal recirculation and carbon availability are designed for the duty.
Working With Other Albion Systems
M-Flocs is usually one stage in a longer treatment train:
- A-Pro DAF can remove oil, grease and heavy solids upstream, so the biological stage works on a lighter load.
- X-Flocs MBR is the option where the treated water has to meet a tighter reuse standard.
- U-Flocs ultrafiltration can polish the effluent, or condition it as feed water for reverse osmosis.
Design Considerations
Every M-Flocs project starts with a site-specific assessment. Media retention screens, upstream screening to protect the carrier surface, basin mixing, oxygen transfer and hydraulic flow paths are designed together. Dissolved oxygen has to be high enough to reach the active biofilm. Sludge age, temperature, pH, alkalinity, load variation and clarifier performance are checked during design and commissioning.
To find out whether an IFAS/AMBBR configuration suits your plant, send your influent data, existing basin details and discharge targets to Albion Ecotech’s technical team.
Related content


Discuss your project
Tell us about your treatment goals, project conditions, or partnership needs, and our team will help you identify the right next step.
Start a project enquiry