
U-Flocs: Ultrafiltration System (UF)
Albion system brand
Albion system brand offers UF System uses 0.02–0.1 μm pressure-driven membranes to remove bacteria, viruses & particulates - ideal for RO pre-treatment and effluent polishing.
Visit official websiteBrand story
What U-Flocs Is
U-Flocs is Albion Ecotech's ultrafiltration (UF) system. Pressure pushes water through a membrane with pores between 0.02 and 0.1 μm, and anything larger than the pores stays behind: viruses, bacteria, endotoxins, particulates and other suspended microbes. Because the separation is physical, it runs at room temperature, needs no chemical dosing and involves no phase change. The rejected material is not put back into the treated water.
How the System Is Configured
The membrane is a hollow fibre design, and feed water can be introduced in two ways: on the shell side, or through the lumen inside the fibres. Which one is used depends on the system design and the feed water. This flexibility lets Albion match the module arrangement to the water source instead of fixing one layout for every project. The system is pressure-driven, so it is sized around flow, operating pressure and the quality the downstream stage needs.
Where U-Flocs Is Used
- Pre-treatment for RO — removes colloids, organics and fine particulates so the RO membranes foul less.
- Lake and river water filtration — cuts turbidity, bacteria and suspended solids in surface water used for potable or process purposes.
- Post-treatment of ETP and STP plants — polishes treated effluent toward discharge and reuse standards.
Working With Other Albion Systems
U-Flocs is rarely the only stage in a plant. It usually works at the end of a treatment train or ahead of a membrane process. Oil, grease and heavy solids are better removed upstream, and A-Pro DAF is designed for that job. Biological stages such as M-Flocs AMBBR or X-Flocs MBR handle the organic load. U-Flocs then polishes the effluent, or conditions it as feed water for reverse osmosis. For streams that are hot or chemically aggressive, Albion's C-Flocs ceramic membrane system is the alternative to a polymeric UF membrane.
The U-Flocs membranes come through Albion's group membrane supply, so the module selection and the plant design are worked out together.
Upgrading an Existing Plant
For an existing ETP or STP that needs better effluent quality for reuse, a UF stage can be added after the current treatment without rebuilding the plant. For a site adding RO, UF can go in ahead of it to protect the RO membranes. Whether it suits a particular plant depends on the feed water quality, the existing hydraulics and the treatment target.
To select a UF configuration, send your feed water data and target quality to Albion Ecotech's technical team.
Related content


Discuss your project
Tell us about your treatment goals, project conditions, or partnership needs, and our team will help you identify the right next step.
Start a project enquiry