
A-Pro: Dissolved Air Flotation System (DAF)
Albion system brand
Albion system brand a gravity-assisted flotation system that clarifies wastewater by floating out suspended solids and oils.
Visit official websiteBrand story
What A-Pro Does
A-Pro is Albion Ecotech's dissolved air flotation (DAF) system for wastewater that carries oil, grease, fats and fine suspended solids. Instead of waiting for these materials to settle, it makes them float. Water is saturated with air under pressure and then released into a flotation tank at atmospheric pressure. The sudden drop forms micro bubbles in the 20–50 micron range, which attach to the particles and lift them to the surface. A hydraulic or mechanical skimming device removes the float layer, and clarified water leaves from the base of the tank.
Why Flotation Instead of Sedimentation
Conventional flocculation and gravity sedimentation depend on a large, dense floc that can settle, which means polymer dosing and a big tank. A-Pro does not need that floc, so polymer is not required, and in some applications the coagulant dose can also be reduced. Loading rate is typically 10–20 m/h, and newer process variants have operated at 40–45 m/h, which is why the unit stays compact. The float comes off thick, at 2–3% total solids, and can go to dewatering directly without an intermediate thickening step.
Where A-Pro Is Used
A-Pro works at the front of the treatment train. It takes oil, grease and solids out of the stream before biological or secondary treatment, so the stages behind it handle a lighter organic and solids load.
- Poultry, meat and food processing — blood, fats, proteins and suspended solids
- Dairy — FOG, milk solids and COD
- Fish and seafood processing — oil, grease, proteins and fine solids from odorous streams
- Mining — heavy metals and suspended solids in process water
- Petrochemical — primary oil-water separation and hydrocarbon removal from refinery effluent
- Textile — colour removal, fibre recovery and clearer effluent
- Tanneries and leather — chromium, sulfides, fats and high TSS
- Pulp and paper — fibre recovery, TSS and COD reduction in mill effluent
The same flotation principle also gives strong algae removal, so A-Pro is used for water clarification as well as wastewater.
Built for Tight Plant Rooms and Retrofits
The modular footprint is considerably smaller than a flocculation and sedimentation line, so A-Pro fits into utility rooms where space is the limit. Units are built in SS304 or SS316L stainless steel, with specialised epoxy coatings available for corrosive environments.
For plants already running flocculation and sedimentation, A-Pro can go in as a pre-treatment or primary treatment upgrade. It cuts chemical dependency and footprint and improves separation without a full treatment overhaul.
Part of the Albion System Range
A-Pro is one of Albion's system brands, alongside M-Flocs AMBBR and X-Flocs MBR. Because it removes oil, grease and solids ahead of biological treatment, it can sit upstream of those systems in a full treatment train. To size an A-Pro unit, share your flow, oil and grease content and suspended solids data with Albion Ecotech's technical team.
Related content


Discuss your project
Tell us about your treatment goals, project conditions, or partnership needs, and our team will help you identify the right next step.
Start a project enquiry